The XF4U-3B resin set is designed to be used with the 1/48th scale Tamiya F4U-1/2, -1A, -1D. Cut the bottom wing where indicated and remove catapult hooks. Cut fuselage at engraved panel lines. Sand. Super Glue resin fuselage front. Subassembly after casting runners and plugs have been removed and sanded flush. Remove engine crankcase locator on kit part A19 and sand flush for new resin crankcase. Engine with new crankcase (drill hole for propeller shaft before gluing) and cowl flaps in place. Make a mark on inside cowl lip for the top panel join line. The mark will indicate the top of the cowling after extension is removed. The cowl panels are not the same size. The extension on the top of

Greater New Orleans, Louisiana Area Model Maker

© 2015-2019 by Rieth Creations llc.