RIETH CREATIONS

Consult photographs of the P5M-1 you are modeling for the modifications needed. Note: Kit part C22 (Step 11), ECM Direction Finding...

This article is an "oldie but goodie" as the model was built in 1999. I realized that I have been posting about the modifications to...

Using sprue cutters, razor saw and hobby knife carefully cut supports from 3D printed parts. Wet sand the surfaces smooth. Use...

I decided to redo the P5M-1 Conversion Set. The entire set will now be 3D designed and printed. This will allow more accuracy and better...

I built the model kit of the SP-5B Marlin several years ago. It represents the last SP-5B the U.S. Navy flew. The flying boat is now on...