RIETH CREATIONS

I decided to redo the P5M-1 Conversion Set. The entire set will now be 3D designed and printed. This will allow more accuracy and better...

Spent some time dialing in the settings for the 3D printer. The 3D printed Flying Tigers medallions/doubloons came out great. I tried 2...

The artwork for the Flying Tigers Scale Model Builders that I created using Fusion360 to 3D print was imported into Inkscape as a DXF...

I recreated the artwork for the Flying Tigers Scale Model Builders starting with a JPG using Fusion360. I then extruded to create a 3D...

I built the model kit of the SP-5B Marlin several years ago. It represents the last SP-5B the U.S. Navy flew. The flying boat is now on...

After many years of researching and collecting information, I now have enough to start creating the PB2Y Coronado. I made CAD files from...

A friend had a family heirloom that they had for years, a miniature of the original style McDonald's restaurant with the golden arches....

The 3D printed F2H-2N nose is glued on to the 1/48th scale Kitty Hawk Banshee model. I've been dialing in the 3D printing specs. There is...

Here is a laser cut and assembled architectural study model for a client. The model is made of chipboard.

The diorama was built for an online website iModeler at the Movies Group Build. It is 1/48 scale. Everything is scratch built except for...

I took many screen grabs of scenes from a DVD of the movie 1941. I used known measurements like a door height to make calculations to...

Continuing on to the finish. Here is the link to the scratch built pick up truck bed- https://www.riethcreations.com/post/2019/04/26/148t...

I am creating a diorama of Steven Spielberg’s movie 1941. I will be doing blog posts of the different components that went into making...

This diorama is my tribute to the brave men that fought the Battle of Midway June 4-7, 1942. The battle became a pivotal turning point of...

This photo was the inspiration for creating the diorama using the 1/48th scale Kitty Hawk F2H-2/2P Banshee with my Rieth Creations Resin...

To make this block for a block and tackle, I used Evergreen .25" (6.3mm) Square Tube, 1/8" (3.2mm) Diameter Tube, 1/16" (1.5875mm) Dia....

When I was working on the 1/96th scale Liberty Ship Model for the National World War II Museum Merchant Marine Exhibit, I needed to make...

I was looking for a “pick me up” and coincidentally I needed a 1/48th scale pick-up truck bed for this model project I’m working on....

The XF4U-3B resin set is designed to be used with the 1/48th scale Tamiya F4U-1/2, -1A, -1D. Cut the bottom wing where indicated and...

The exhaust cone and rear of the jet engine should have the same diameter. If gluing the flaps in the lowered position, you can see the...