Michael E RiethDec 11, 20181 minASSEMBLING THE F2H-2 BANSHEE RESIN WING TO THE KH FUSELAGE. ENGRAVE NEW PANEL LINES.REMINDER: Glue the KH cockpit, nose gear well, and part C62 to the KH fuselage. Glue the revised resin rear fuselage to the KH front...
Michael E RiethDec 11, 20182 minASSEMBLING THE F2H-2/2P BANSHEE RESIN EMPENNAGE (TAIL) TO KH FUSELAGE (REVISED)I've revised where to cut the fuselage after feedback and I have made the rear fuselage a one piece hollow cast part. Gently scribe along...
Michael E RiethDec 11, 20181 minASSEMBLING THE F2H-2 RESIN CENTER WINGThe upper and lower wings were cut from the casting sprue and some resin runner material was left to protect the edges and corners from...
Michael E RiethDec 11, 20181 minASSEMBLING THE F2H-2 BANSHEE JET ENGINES AND INTAKESFor easier fitting and gluing of the resin intakes to resin wing, it is advised that the jet engines be cut apart. Paint engine interior...